pc support

ICMP Internet control message protocol It’s not for data transferring... It really designed for routing. Like to check “Did I drop any packet’s….”                         * It does the error handling in the network                         * It debug the errors and show the message IP protocol had no error reporting or correcting mechanis Who send who recivee….   ICMP messages use the following format   The most important ICMP message types Datagram –        no call setup phase –        more flexible –        more reliable in cases of switching node failures –        difficult to control network’s state and provide quality of service •          Virtual circuits –        network can provide sequencing –        traffic engineering can be applied, enabling more practical provision of quality of service (QoS) support –        less reliable in cases of switching node failure

with predefined  log settings

For excrement I was try to paly with office firewall but I felt it is risky then I found the vm version of the firewall So I have tried to install it on VM and I am sharing it here now. Firstly, install VMweare workstation Then I have downloaded the firewall image from Fortinet web site, if you need it I can share it with you. After open the VM get the image OS to it And select only one Ethernet interface for it Also verify the Ip address of the VMware interface to adding   the IP to firewall image User name is admin and use blank for for password So we can configure the port now                 Show system interface                 Config system interface     Edit port1     Setip 192.168.12.200/255.255.255.0     Set allowaccess http https ssh ping fgfm telnet      End Then open your browser and tyrp the Ip You can log to your firewall VM now

Go to the Start Button  right-click on the corner and then point to Command Prompt (Admin).  Or else, open the CMD as Admin method     Now, use this PC or My computer to check the Pen or USB Drive.     I will take the "I"     Now click on the CMD and type in the letter ":"     So, the pen changes to the CMD.     Now, if you do not have the "del * .lnk" option above     Now, just do this without having to change anything and paste it in CMD      attrib -s -r -h *. * / s / d / l     Now Enter. Then the virus has disappeared from the pen